Wasp-bar-code Wasp WPL606 Manual de usuario descargar pdf (Pagina 15)

3.5 Loading Label For Peel-off Mode

1. Open the front and top printer doors

2. Open the print head left lever

3. Pull several inches of labels out through the front of the printer and remove

the label(s) from the backing

4. Feed the label backing between the platen roller and the silver peeler roller

then press the MENU button several times to advance the label backing

through the rollers.

5. Either advance the backing or roll back the labels to take the slack out of the

media.

Tear Ba

Peeler

Roller

Platten

Roller

Label

Backing

Figure 15: Peeler installation

6. Close the print head lift lever.

7. Close the front panel and feed the excess backing through the bottom of the

front panel.

Label

Backing

Figure 16: Front panel media location with Peeler

8. Press the FEED button several times to align the labels and recalibrate

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Sin comentarios

Wasp-bar-code Wasp WPL606 Manual de usuario Pagina 15